Action Electronics

Sounds

Home »  Sounds

P55 ASDIC SOUND

ASDIC sound with reverberation that dies away. The timing between the ‘ping’ sounds is adjustable, as is the volume. The unit provides 1 Watt of output which, due to its nature, carries for a long distance. Case size 73.5mm x 49.5mm x 29mm. Requires a speaker of at least 2″ diameter.

P57 TWIN HORN

Ideal for that luxury power-boat, car or big truck model. Both tones run simultaneously. 1 Watt output capability; both tones adjustable; Screwed case size 60mm x 40mm x 21.3mm. 3″ or larger speaker is recommended.

P34 AUDIO MIXER-AMPLIFIER

For 6 Volt to 12 Volt operation; allows up to four ACTion sound units (except P63/64) to be run through a single 8 Ohm speaker (77mm – 100mm). 53.5mm x 37.5mm x 23mm. Screwdriver connections.

P13 FOGHORN/HOOTER

Deep, throaty sounds require a largish speaker; 4″ is the smallest practical size; a 5″ to 6″ one is even better (a Woofer is the best). If you have the space in your boat, this will do the business! 6 to 12 Volt supply; 1 Watt output capability; fully adjustable tone. Case size 53.5mm x 37.5mm x 23mm.

P14 DESTROYER SOUND

The familiar ‘Whoop-Whoop’ sound – fully adjustable for tone, rate and volume – with a 1 Watt output. 6 to 12 Volts; Size – 71mm x 49.5mm x 23mm. We have sold more than one of these as doorbells!!

P21 EMERGENCY SIREN

The rapid rising/falling sound used on modern Police, Fire, Ambulance and other emergency services vehicles. New dual-rate version; can be switched from slow to fast siren with extra switch, if desired (P43/44 is ideal). Rate, tone frequency and volume are fully adjustable, with 1 Watt output capability. For operation on 6 to 12 Volts. Size 71mm x 49.5mm x 23mm.

P29 STEAM WHISTLE/HORN

A Steam Whistle/Steam Horn, with hissing steam sound. The tone is adjustable from whistle to horn. For 6 – 12volts; three I/C design has adjustable whistle tone and volume control; 1 Watt maximum output. 2 inch to 3 inch mylar speakers are recommended for steam whistle, and 4 inch mylar speaker for steam horn. Case size 55mm x 40mm x 20mm.

P37 SHIP'S BELL

Dave has recently found a small supply of the now-defunct IC chip which forms the basis of our Bell, so we can offer it back onto the market for a limited time. We have also modified it to add some much-needed bass to the sound. Tone and volume are adjustable. Ring if you’re interested (OUCH!)

P101 15 WATT AUDIO MIXER/BOOSTER

For 6 Volt to 18 Volt operation; Full 15 Watt output @ 18v. Allows up to four ACTion sound units to be run through a single 8 Ohm speaker. Ideal partner to new P100 Noisy Thing. 74mm x 50mm (+ heatsink) x 28mm. Screwdriver connections.

P97 6 WATT AUDIO MIXER/BOOSTER

For 6 Volt to 12 Volt operation; Full 6 Watt output. allows up to four ACTion sound units to be run through a single 8 Ohm speaker.74mm x 50mm (+ heatsink) x 28mm. Screwdriver connections.